december 2017 inductors wound ferrite ADL3225V 3225 [1210 inch]* * dimensions code jis[eia] inductors for decoupling circuits ADL3225V type adl-v series (for automotive)
(2/9) 20171213 / inductor_automotive_decoupling_ADL3225V_en.fm inductors reminders for using these products before using these products, be sure to request the delivery specifications. safety reminders please pay sufficient attention to the warnings for safe designing when using this products. the storage period is less than 12 months. be sure to follow the storage conditions (temperature: 5 to 40c, humidity: 10 to 75 % rh or less). if the storage period elapses, the soldering of the terminal electrodes may deteriorate. do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). before soldering, be sure to preheat components. the preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150c. soldering corrections after mounting should be within the range of the conditions determined in the specifications. if overheated, a short circuit, performance deterioration, or lifespan shortening may occur. when embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. self heating (temperature increase) occurs when the power is turned on, so the tolerance should be sufficient for the set therm al design. carefully lay out the coil for the circuit board design of the non-magnetic shield type. a malfunction may occur due to magnetic interference. use a wrist band to discharge static electricity in your body through the grounding wire. do not expose the products to magnets or magnetic fields. do not use for a purpose outside of the contents regulated in the delivery specifications. the products listed on this catalog are intended for use in general electronic equipment (av equipment, telecommunications equi p- ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip- ment, industrial robots) under a normal operation and use condition. the products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual- ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damag e to society, person or property. if you intend to use the products in the applications listed below or if you have special requirements exceeding the range or c onditions set forth in the each catalog, please contact us. (1) aerospace/aviation equipment (2) transportation equipment (electric trains, ships, etc.) (3) medical equipment (4) power-generation control equipment (5) atomic energy-related equipment yy (6) seabed equipment (7) transportation control equipment (8) public information-processing equipment (9) military equipment (10) electric heating apparatus, burning equipment (11) disaster prevention/crime prevention equipment (12) safety equipment (13) other applications that are not considered general-purpose applications when designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securi ng pro- tection circuit/device or providing backup circuits in your equipment. reminders
(3/9) 20171213 / inductor_automotive_decoupling_ADL3225V_en.fm please be sure to request delivery specifications that provide fu rther details on the features and specifications of the produc ts for proper and safe use. please note that the contents may change without any prior notice due to reasons such as upgrading. inductors inductors for decoupling circuits wound ferrite features small size and thin form factor (mounting area 3.2 x 2.5 mm, height 2.6mm max.) achieving broadband impedance characteristics and good dc superimposition characteristics as the result of an original coiled w iring design and original structure ensuring consistent high quality and reliability as the result of a completely automated manufacturing process application inductor for use with separate signal and power lines in in-vehicle poc (power over coax) part number construction operating temperature range, package quantity, product weight ?? the operating temperature range includes self-temperature rise. overview of ADL3225V type adl 3225v - 470 m t - tl 000 series name lwh dimen- sions inductance inductance tolerance winding identification packaging style internal code (mm) (h) 3.22.52.4 470 47 m 20% tl ?330mm reel 000 type temperature ranges package quantity individual weight operating temperature ? c storage temperature c (pieces/reel) (g) ADL3225V ?40 to +105 ?40 to +105 5000 0.074 product compatible with rohs directive halogen-free compatible with lead-free solders aec-q200 rohs directive compliant product: see the following for more details.https://product.tdk.com/info/en/environment/rohs/index.htm l halogen-free: indicates that cl content is less than 900ppm, br content is less than 900ppm, and that the total cl and br conte nt is less than 1500ppm.
(4/9) 20171213 / inductor_automotive_decoupling_ADL3225V_en.fm please be sure to request delivery specifications that provide fu rther details on the features and specifications of the produc ts for proper and safe use. please note that the contents may change without any prior notice due to reasons such as upgrading. inductors ADL3225V type recommended reflow profile preheating soldering peak temp. time temp. time temp. time t1 t2 t1 t3 t2 t4 t3 150c 180c 90 to 120s 230c 40s 245c 5s max. natural cooling t3 t1 preheating t2 soldering t3 t3 t4 t2 t1 t: time peak t: temperature
(5/9) 20171213 / inductor_automotive_decoupling_ADL3225V_en.fm please be sure to request delivery specifications that provide fu rther details on the features and specifications of the produc ts for proper and safe use. please note that the contents may change without any prior notice due to reasons such as upgrading. inductors ADL3225V type shape & dimensions recommended land pattern dimensions in mm 3.20.2 2.50.2 2.40.2 ( 0.4 ) ( 0.9 )( 0.9 ) ( 0.45 ) ( 0.4 ) dimensions in mm 2.5 0.9 2.2 0.9
(6/9) 20171213 / inductor_automotive_decoupling_ADL3225V_en.fm please be sure to request delivery specifications that provide fu rther details on the features and specifications of the produc ts for proper and safe use. please note that the contents may change without any prior notice due to reasons such as upgrading. inductors ADL3225V type electrical characteristics characteristics specification tables ?? rated current: smaller value of either isat or itemp. isat: when based on the inductance change rate (30% below the initial l value) itemp:when based on the temperature increase (temperature increase of 40c by self heating) measurement equipment ? equivalent measurement equipment may be used. l l measuring frequency dc resistance rated current ? part no. isat itemp (h) tolerance (khz) ( ? )max. (ma)typ. (ma)typ. 47 20% 100 0.9 300 500 ADL3225V-470mt-tl000 measurement item product no. manufacturer inductance 4294a keysight technologies dc resistance 4338a keysight technologies
(7/9) 20171213 / inductor_automotive_decoupling_ADL3225V_en.fm please be sure to request delivery specifications that provide fu rther details on the features and specifications of the produc ts for proper and safe use. please note that the contents may change without any prior notice due to reasons such as upgrading. inductors ADL3225V type electrical characteristics impedance frequency characteristics graph derating 470mt 1 110 10 100 100 1000 1000 10000 100000 fre quency(mhz) impedance( ) 0 100 200 300 400 500 600 ?50 ?25 0 25 50 75 100 125 temper ature(c) rated current (ma)
(8/9) 20171213 / inductor_automotive_decoupling_ADL3225V_en.fm please be sure to request delivery specifications that provide fu rther details on the features and specifications of the produc ts for proper and safe use. please note that the contents may change without any prior notice due to reasons such as upgrading. inductors ADL3225V type electrical characteristics impedance vs. dc bias characteristics graph 0 200 400 600 800 1000 1200 1400 0 50 100 150 200 250 300 dc cu rrent (ma) 2mhz 700mhz impedance () measu rement circ uit adl 3 225v 0 100 200 300 400 500 600 700 800 0 50 100 150 200 250 300 3 50 400 450 500 impedance () dc c u rrent (ma) 2mhz 700mhz measu rement circ uit 33pf adl 3 225v 2k
(9/9) 20171213 / inductor_automotive_decoupling_ADL3225V_en.fm please be sure to request delivery specifications that provide fu rther details on the features and specifications of the produc ts for proper and safe use. please note that the contents may change without any prior notice due to reasons such as upgrading. inductors ADL3225V type packaging styles reel dimensions 5 " 1 & % * . & / 4 * 0 / 4 ty p e a w1 w2 n e ADL3225V ?3302 13.50.5 17.51 1001 2 typ. dimensions in mm ty p e a b ? d0 e f p0 p1 p2 w k t ADL3225V 2.90.1 3.60.1 1.550.05 1.750.1 3.50.0 5 40.1 40.1 20.05 80.2 2.50.1 0.30.05 ?13.0 0.2 ?21.0 0.8 n e 2.0 0.5 a dimensions in mm 1.0 w2 w1 w f e p0 p1 p2 ?d0 b a t k
|
